Problem:

I was recently trying to link Revit models to a federated file on Revit 2021. The models were failing to link, but no error message or warning was provided. The federated host model and the links were all initiated and ‘live’ collaborated models on the Autodesk Construction Cloud.

 

Resolution:

I had previously used this method ( Moving the Revit BIM360 CollaborationCache Folder to a Secondary Hard Drive ) to move the cache for BIM 360 / ACC Docs to a secondary hard drive. Windows Explorer showed this hard drive was essentially running out of space. So Revit was failing to link the model, but wasn’t providing a ‘insufficient hard drive space’ warning.

But why was the hard drive filling up?

I reviewed the files and folders and discovered that one particular program was generating massive log files:

The final resolution was quite simple – delete the massive log files, and then the files linked to Revit fine. I used 7-zip with the “Fastest” and “Delete files after compression” option to archive and delete those logs.

To future-proof this scenario, I’m considering writing a Powershell script to detect and possibly archive and delete the existence of massive log files.

Box is great, and Box Sync is still the most robust file sync tool I have used for huge datasets. In BIM and VDC, our data is getting bigger, primarily due to the prevalence of point clouds. It is not uncommon to have 50gb of scan data for a single site scan. Moving that data to the cloud is challenging, and a lot of data processing and point cloud indexing work still happens on local machines. This means we have to upgrade our local storage devices (hard drives) to handle those tasks.

Recently I went about upgrading the storage on both my Workstation and my Laptop (a Metabox). I wanted a relatively huge platter drive in my workstation, and a relatively huge SSD in my laptop. I had a look online and after a bad experience with Umart, I ended up buying an 8tb Seagate Barracuda from MSY, and a 2tb Samsung 970 EVO from an eBay vendor. Both drives come with a 5 year warranty.

I’ll describe both of these upgrades in detail below

Samsung 970 EVO NVMe M.2 SSD 2tb
Seagate BarraCuda Pro 8tb – and a new SATA cable

Upgrading the Box Sync Hard Drive on my Workstation

Box recently released ‘Box Drive’, but it has a local cache limit of 25GB, which is quite useless for BIM in my opinion.  That means I still wanted to keep using the old faithful Box Sync.  But…

Box Sync does not allow you to move or change the folder location of its data (actually you can, but you only get one chance when you first install it).  After installing, you can’t move the Box Sync root folder without some kind of hacky tricks like pointers, and I didn’t want to go down that path.  We have been syncing Box to a folder on our E drives (secondary hard drive), and now it was time to upgrade that 2tb secondary drive to something bigger.

Here’s how I kept all my Box Sync data and upgraded the hard drive:

  1. Shut down computer
  2. Install the new hard drive (it was a simple SATA drive with data and power cables)
  3. Boot up the computer
  4. Initialise the drive with GPT Partition Style

    GPT Partition Style

     

  5. Use Macrium Reflect to clone the partition from the old drive – including all Box data – to the new drive

    Cloning with Macrium Reflect
  6. Reboot into Safe Mode
  7. Use the video below to ‘swap the drive letters’. This step basically tricks Windows into using the new, larger hard drive (as the ‘E’ drive in my case). And Box Sync works perfectly, it just picks up where it left off.

Now we have lots of room for Box Sync and more:

New hard drive capacity

One final thing I had to do was “uncompress” the drive data. I had used NTFS compression with the previous drive but now I no longer needed the compression. Just go to the file or folder properties and untick “Compress this drive”.

Adding a New SSD into My Metabox Laptop

The next thing I did was add another SSD to my laptop. I looked up the manual and it said I had another M.2 2280 (22mm x 80mm) slot available. In the first slot I already had a Samsung 950 Pro 512gb as my primary drive. I did some research and decided to go with a Samsung EVO 970 2tb drive. After waiting patiently for my ebay order to arrive, I then cracked open the Metabox to install it.

Here is what I did:

  1. Removed the back cover of the laptop

    This is under the back cover of the Metabox

     

  2. Looked around everywhere and couldn’t find the M.2 slot – in fact I couldn’t find my primary drive. After a moment of panic, and then a quick look on YouTube, I realised I had to remove my keyboard. So I removed the KB screw and carefully pried the keyboard off, then there it was – my spare M.2 slot!

    Additional M.2 slot under the keyboard

     

    New drive ready to install
  3. I carefully installed the 2tb SSD and then closed up the laptop
    Installed
  4. The system booted up fine, then I went into Disk Management and initialised the disk with a GPT record,
  5. Created a new partition with NTFS default sector size, and
  6. We are good to go!

Now that I had a much bigger SSD to work with, I immediately moved my Revizto Working Folder onto that new 2tb SSD. This will allow me to fully utilise a lot of the great new Revizto Point Cloud features and at the same time have full M.2 SSD performance.

Update:

Out of interest, I have added the Samsung Magician performance scores for the Samsung SSD 950 PRO 512GB and Samsung SSD 970 EVO 2TB below:

Samsung SSD 950 PRO 512GB Performance

 

Samsung SSD 970 EVO 2TB Performance