At the risk of stating the obvious, learning is an important part of being a knowledge worker. But learning can be boring, right? There are a whole bunch of ways to learn and improve in our work skills, and it can be really hard to know which way is best. When it comes to BIM, and future technology in general, there is something electric about putting a large group of like-minded people in the same room together. And if you do that for a few days in a row, well, anything can happen…

So, yes, I am excited about the BILT conference in Adelaide this year, for quite a few reasons. In fact, BILT (previously Revit Technology Conference) has been around so long now, and is so well respected, that I wonder a little about what I can add by writing about it! But I can share some of my personal experiences, and hopefully that may encourage a few of you to really consider heading to BILT ANZ this year.

A long, long time ago…
I had spent a few years as an Architectural Drafter in a small firm on the Sunshine Coast when RTC first came to my attention. It was the place to be! My job description had been steadily growing, to include more technology, hardware, software, and systems management. As BIM persons, we often have to wear various hats at various times, and usually at the same time. I really, really wanted to attend, so I made the suitable requests to my employer at the time and he was gracious enough to pay for the ticket and accommodation and allow me to attend. For some of you, that can be hard going.

You basically need to prepare to describe to your employer:
1.    Your current value
2.    Your desire to attend
3.    How that will increase your knowledge
4.    How that will help the business
5.    And ultimately lead to more profits than the ticket price

It sounds like a lot, but depending on your work situation it may be as simple as a cup of coffee chat, or perhaps you need to put some of those ‘return on investment’ benefits into writing and send it up the management chain. If you haven’t attended before, I do recommend that you make the effort… which leads me back to RTC 2011.

It was a really eye-widening experience for me. I was already a Revit blogger and ‘thought I knew stuff’, but trust me I still learned. And it wasn’t boring. I have this really vivid memory of sitting in a class with Phil Read out the front, talking about how Revit was used to design and document these intricate, beautiful designs on some famous movie sets. He also had schwag (gifts), and he had some really down-to-earth comments about how there is more to life than Revit (this came as a surprise to me at the time). With three kids now, I definitely get it. I guess I’m trying to describe this moment when the technology was exciting, the lessons were well delivered, and the speakers were real and practical. That is what you can expect at a BILT conference.

Fast forward to 2016
My work situation had changed a few times, and as with all of us, my knowledge and experience had grown. I had started to specialize in a few specific areas. Its funny just how ‘big’ BIM really is. You can spend years learning, but still just feel like you are running to keep up with others. Would BILT still be of benefit to me? This time around, I was part of two sessions and also had the privilege of delivering the Keynote Sponsor address. Also, it was interesting to see how the conference had widened its scope to include so many related fields, including lots of sessions for the ArchiCAD crew, Facilities Management, Quantity Surveying. I could see that, just as my experience had grown and the industry had changed, BILT had adapted to those changes.

RTC 2016 was overall an engaging and positive experience. I was looking for different things, but I still found them. I was interested to meet some of the key Dynamo users and developers that I had been following online, like Konrad Sobon, Adam Sheather, and of course Marcello Sgambelluri. I really enjoyed a well researched session by Joe Banks, where he compared different collaboration platforms in a dynamic and thorough fashion. Also, Aaron Maller showed us just how easy it can be to set up your own virtual hardware. What I’m saying is that there is a session for every hat that you wear as a BIM person. There are sessions that reinforce what you know, or challenge what you thought was best practice. And along the way there are some good laughs and great conversations with interesting people.

What about this year?
I was really happy to hear that BILT was coming to Adelaide, my home, in 2017. Adelaide has gone through a really accelerated learning and development period surrounding the massive nRAH project, and we are seeing the majority of significant projects now progressing towards a more developed and refined BIM flavour. At the same time, there is still some way to go, so hosting BILT will hopefully continue to energise that local market. What this means, too, is that there is a lot of ‘lessons learnt’ floating around. That is one reason why I chose to run a session called BIM Implementation in Real Life this year. I am going to interview people from a range of disciplines and job positions, and see what they have learned from the BIM implementation process in their office.

I’ll also be running a Lab where I hope to share a lot of real productivity-focused Revit tips. Enough about me! There is much more to see, like:

  • Dr. Louise Mahler will present the keynote address,
  • Dr. Daniel Davis will present a session on the research he is involved in at WeWork, and
  • Alain Waha will discuss digital transformation.
  • There is a new stream for Quantity Surveyors (first time with lab sessions), and
  • Some big announcements still to come in the Construction Stream.

This year the ArchiCAD sessions are fully integrated into the 3 day BILT program alongside the classes on Revit (and now also many other software packages, for example for QS and scheduling). The ArchiCAD program is here:
https://www.rtcevents.com/blog/?p=6401

Finally, you can win a free ticket to the whole show! You can register for BILT, and also register for the Golden Ticket here:

All the best for the next couple of months and I hope to see you at BILT ANZ 2017 🙂

RTC AUS 2016 is imminent! What are you looking forward to? I’m excited to connect with some Dynamo pros, and talk all about BIM process improvement.

Here’s what I’m talking about at RTC (this is a concise teaser only) …

  • Keynote Sponsor Address: BIM is Broken, but we can fix it!
  • Session 1.3: See a tested and proven issue tracking and resolution workflow for BIM
    (I’m running this session with Virtual Built Director and Creator of BIM Bicycle, Michael Clothier)
  • Session 2.2: How to use Dynamo productively every single day…

I even get a little badge:

rtc2016au_web_banner_speaker_600x300.jpg

While many of us are struggling with a serious multiplication of models, Chris Price & Matthew Siebert have put together an interesting little case study on placing all design consultants in one model. Not just all using Revit – all in one single Revit model… Obviously, Revit Server (possibly plus VPN) or some sort of Remote Desktop scenario is required for geographically isolated teams, but there are definitely some pros to this method.

In my opinion, it would only work for models up to a certain size (a few hundred MB with all consultants isn’t going to be a huge building), after which I think it could become very difficult. Once you start segregating a model by sector or level, you aren’t in “one model” anymore. The other problem is that specialist subcontractors may not be using Revit at all (a post for another day). But the RTC Handout and Powerpoint is definitely worth a look. You will have to login to AUGI to download.

Read more and download at:
http://forums.augi.com/showthread.php?150851-Session-11-Revit-Collaboration-amp-a-quot-One-Model-quot-Case-Study&s=8a6e0f7044a436edad552d6605c26ff8

Daniel Stine hosted the interestingly named RTC class:
Mastering Materials: Getting What You Want from Revit

In a recent Cadalyst article, he gives a few good material tips.  Here are just 3 of them:

1) Material Assets
Think of a material as a container. Some of the information represents elements you can touch and see when the building is complete, while some does not. Assets are modules, if you will, that better define a material. These modules are optional and can be added or deleted as needed; however, most materials have an appearance asset, which cannot be deleted.

2) Material Transparency in Elevations (vs 3D views)
In any elevation view, materials are not transparent, as you can see in the left-hand image below (regardless of what Visual Style is set to). Even turning off the glass material in a view’s Visibility Graphics Overrides (VG) will not allow you to see through the “opening,” as seen in the second image. The trick here is to edit the opening in the family so it is transparent in elevation, as shown in the third image.

To achieve that, simply select the opening and check Elevation on the Options toolbar.

3) Self Illumination
 A surface with a self-illuminating material will actually add light to a scene. In the image below, the self-illuminating low wall in the center of the room is the only light source. This material can also be used to get a very white surface when nothing else seems to be working.

Read more / via
http://www.cadalyst.com/cad/revit/understanding-autodesk-revit-materials-17422

As most of you probably know, the call for RTC2013 abstracts has gone out.  Here are some bits and pieces from RTC2012 that you can check out online.

Reconstructing the AEC process (Jay Zallan):
PDF Download Here

PowerPoint Download Here

http://cad-vs-bim.blogspot.com/2012/07/rtc-usa-2012-reconstructing-aec.html
Various re-caps of RTC2012:

James Vandezande / HOK
Brian Mackey / Mackay Consulting
Aaron Maller / Beck Group
Paul Aubin / Consulting Services
Lonnie Cumpton / BIM9
Robert Manna / Stantec
Aaron Vorwerk / D|C|CADD
Jeffrey Pinheiro / Fletcher Thompson (here here and here)
Erik Lewis / Devenney Group Ltd.

Links from:
http://www.architecture-tech.com/2012/07/rtc-usa-feedback.html

Revit Add-Ons: RTC NA 2012 Wrap Up – With an Eye Towards Add-ons

Who’s afraid of the Big Bad BIM?: RTCUSA Day 2 recap

At RTCNA this past week, Harry Mattison has been taking API challenges and answering them left, right and centre.  Most of us are trying to figure out What Revit Wants, while Harry seems to inherently understand What the Revit API Wants – and what it can handle.

Take this example – he was challenged to provide a method of printing Sheets from a Linked RVT in the host project.  Turns out it was easy!  Read his full post below:
Print Sheets from Host & Linked RVT files | Boost Your BIM – making Revit even better

But this wasn’t the only challenge he answered during RTCNA.  Here are a few more gems:
Live link between Parameters in Model & Detail Families
(yep, it updates itself)

“View” Field added to a Detail Item Schedule
(ability to schedule the View a particular Detail Item exists in — 2014 only)

Automatically Synchronize With Central
(let’s call this “the real Revit autosave” — 2014 only)

Nice work Harry.

You are going to RTC.  Will it be amazing?  Probably.  But will you get the most out of it?  That is completely up to YOU.  Here are a few pointers.

  1. Drink lots of coffee (in moderation, of course)
  2. Talk to as many people as you can – target the people who you have made contact with online but haven’t met in person
  3. Get your own name out there in conversation – make sure you say something memorable, like “this Rivett program is cool, hey”
  4. If you get bored, go get another coffee

Here is the golden tip – for each session that you attend, make a note of 2 (two) things that you think you can use.  These may be

  • timesavers,
  • ways to customize your Revit environment,
  • online resources you didn’t know about,
  • anything that could improve your personal workflow or your company standards.

But aim for 2 points per session.  More points make it difficult to actually recall and apply them, less and you are not getting your RTC value-for-money.

Have fun!

PS – Feel free to post your own ‘survival tips’ in the comments…

Please RT.  Last year, I attended the Revit Technology Conference in Australia.  It was an absolutely awesome experience.  While the information was of a very high standard, I personally loved the opportunity I had to meet some of the top Revit users and professionals in the world.

This year, something new and exciting is happening.  Its called Visday (vizz-day).  It is the premier forum on advances in computer generated visualisation for the architecture, engineering and construction industries, and is collocated to the renowned RTC event. The powerful line-up of speakers includes Lon Grohs the Vice President of Chaos Group from Bulgaria, SHW group, HKS and VEO from the United States and local talent from Flood Slicer and Atomic 3D.

What Revit Wants is pleased to offer you the opportunity to win a free ticket to VisDay 2012 Australasia.  All you need to do is send an email to secretary@rtcevents.com in answer to the question in 25 words or less… What aspect of VisDay are you most interested in?”.  Be sure to include the fact that you are heard about this from What Revit Wants (see full rules below)

VisDay will be held on Wednesday 23 May at Novotel Wollongong Northbeach, NSW, Australia. Further details can be found on the website
 
Here are the full competition rules:

“We would like to offer your readers a single complimentary general admission ticket to VisDay, in exchange for feedback on attending VisDay. i.e.
Tell us in 25 words or less… What aspect of VisDay are you most interested in?

Prize includes registration to VisDay 2012 Australasia on Wednesday 23 May at Novotel Wollongong Northbeach. Complimentary scheduled transfers are available from Sydney city and Sydney Domestic Airport. Prize does not include other travel or accommodation.

All submissions are required by Monday 30 April, the winning entry will be decided by the VisDay Committee and will be notified on Wednesday 2 May.

Please email your submission to secretary@rtcevents.com noting the source blog. Please ensure you check back onto the blog after 2 May to see if you are a winner. Winning comments will be posted on the blog site along with the winners name.”